General Services


Oil and Filter Changes

Oil and Filter Changes

(3mo/3k-6mo/6k)
  • Test drive & check vehicle lighting
  • Change reminder sticker
  • Reset oil reminder light if equipped
  • Check & refill under hood fluids
  • Change Oil & filter
  • Grease fittings as needed
  • Check front & rear differentials as required
  • Check Transfer case (4wd)
  • Perform undercarriage inspection
  • Check tire condition & inflate
  • Refill oil w/ proper oil
  • Check Transmission fluid
  • Lube doors, hinges & latches

Cooling System Inspection

(12mo/12k)

  • Test drive & check vehicle lighting
  • Inspect belts, all hoses & clamps, radiator & water pump
  • Pressure test cooling system & radiator cap
  • Check condition of coolant & freeze point
  • Check air pressure in tires
  • Complete inspection & advise on findings

Cooling System Inspection
Electrical System Inspection

Electrical System Inspection

(12mo/12k)

  • Test drive & check vehicle lighting
  • Test battery condition using sophisticated tester
  • Perform charging & starter system diagnosis
  • Check condition of belts
  • Check condition of battery ends & cables
  • Print out test results & advise on recommendations

Emission System Tests

  • Test drive & check vehicle lighting
  • Plug in Diagnostic tool & check for trouble codes
  • Examine scan tool data and interpret
  • Examine under hood emission components
  • Examine ignition system components
  • Advise on findings & relay recommendations

Emission System Tests
Fuel System Service

Fuel System Service

(24mo/24k)
  • Test drive & check vehicle lighting
  • Install scan tool & look at data & codes
  • Check fuel system pressures
  • Examine fuel lines, hoses & connections
  • Examine fuel sample
  • Install fuel system cleaner & add cleaner
  • Start vehicle & allow fluid to clean system
  • Add Techron fuel additive
  • Remove cleaning equipment & reinstall hoses
  • Start engine & check for leaks
  • Test drive vehicle and assess performance

Transmission System Flush

(30mo/30k)
  • Add cleaner & test drive & check vehicle lighting
  • Hook up flush machine & fill w/ proper fluid type
  • Perform complete fluid flush
  • Remove machine, top off fluid level & check for leaks
  • Test drive & confirm proper shifting

Transmission System Flush
Cooling System Flush

Cooling System Flush

(36mo/60k)
  • Test drive & check vehicle lighting
  • Examine cooling system components (hoses, radiator, clamps, water pump & belts)
  • Add coolant conditioner & measure new coolant
  • Flush out old coolant
  • Clean & refill coolant recovery bottle
  • Test radiator cap
  • Remove flush machine, tighten clamps
  • Dispose of spent coolant for recycling

Engine Performance Tune-up

(50mo/50k)
  • Test drive & check vehicle lighting
  • Install scan tool & look at data & codes
  • Interpret scan information & note
  • Examine performance components
  • Check ignition system components
  • Advise & recommend on needed repairs
  • Replace needed parts & perform adjustments
  • Add Techron fuel additive to fuel
  • Use scan tool to reset computer adaptives & codes
  • Refill any fluids removed
  • Test drive vehicle and chassis performance

Placeholder
Timing Belt Replacement

Timing Belt Replacement

(60mo/60k- 120mo/105k)
  • Test drive & check vehicle lighting
  • Remove drive belts & timing belt
  • Examine related components & water pump condition
  • Clean timing belt area & related components
  • Re-install parts & align all parts properly
  • Refill any fluids removed & restart
  • Check for noises or leaks
  • Reset ignition timing
  • Test drive vehicle